Media Converter Products
Switches
Power Over Ethernet
SFP's and GBICS
NIC PCMCIA PCIe Adapters
CWDM Products
Home Audio Systems
Power Equipment
Fiber Cables
Copper Cables
$0 - $499.99
$500.00 - $1499.99
Over $1500.00
 
C6010-1029-A2 T1/E1 to Fiber Ion Platform Media Converter Card C6010-1029-A2 T1/E1 to Fiber Ion Platform Media Converter Card
$1,035.69
more details
C6010-1029-A1 T1/E1 to Fiber Ion Platform Media Converter Card
$970.14
C6010-1011 T1/E1 to Fiber Ion Platform Media Converter Card
$468.68
Home > Media Converter Products > Stand-Alone Media Converters > 10/100 Mbps Converters
SSRFB1014-100 10/100 Bridging Remotely Managed NID
Part Number SSRFB1014-100
SSRFB1014-100 10/100 Bridging Remotely Managed NID
SSRFB1013-100 Shown
Email a friend   
Price
Retail Price:  $770.00
Your Savings:  $265.26
Your Price:  
$504.74
Availability:
Back Order
Share |
Choose Options
Wide Input Power Supply  
Mounting Options  
Quantity
 Description
Transition Networks 10/100BASE-TX (RJ-45) [100 m/328 ft] to 100BASE-FX (SC) single mode 1310nm [20 km/12.4 miles] Remotely Managed Bridging NID (Network Interface Device) Stand Alone Media Converter

Ideal for both Enterprise and Service Provider applications were entry level management information is needed on both the local and the remote device. This management information is accessible through the local unit installed in a managed Point System Chassis as the remote stand-alone unit reports its current operating status back to a local unit.
Devices should be used in pairs with the remotely managed stand-alone unit used in conjunction with the managed chassis card CSRFB10xx-100.

Features : 


  • Auto-Negotiation (802.3u)
    Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
  • AutoCross™
    Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
  • Far End Fault (FEF)
    A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
  • Transparent Link Pass Through
    Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
  • Bandwidth Allocation
    An important feature found on select converters which allows network administrators to set the bandwidth of the converter to 64KB increments via SNMP management.
  • Loopback
    This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes.
  • Last Gasp
    This feature enables the device to store a small amount of power to enable it to send out an SNMP trap to alert the management console in the event of a power failure.
  • Remote Management
    Select stand-alone converters can be managed through SNMP when used in conjunction with a chassis based converter.
  • Automatic Link Restoration
    Transition Networks's converters will automatically re-establish link in all network conditions.
  • Link Test
  • Read Management Features: 



    Power 

    Copper Link Status 

    Copper Speed 

    Copper Duplex 

    Fiber Link Status 

    Fiber Duplex 

    Fiber Loop Back Status

Specifications: 
StandardsIEEE Std. 802.3, TS-1000 OAM v2
Data RateCopper: 10/100 
Fiber: 100 Mbps
Filtering Addresses1K MAC addresses
RAM Buffers256K
Max Frame Size1916 bytes untagged 
1914 bytes tagged
SwitchesSW1: TP Auto-Negotiation 
SW2: TP Duplex with 
Auto-Negotiation Off 
SW3: TP Speed with 
Auto-Negotiation Off 
SW4: Fiber Duplex 
SW5: Link Pass Through 
SW6: Mode: Terminal or Center
Status LEDsPower 
TP Duplex/Link/Activity 
TP 10Mbps/100Mbps 
Fiber Link/Activity 
Fiber Duplex
DimensionsWidth: 3.25” (82mm) 
Depth: 4.8” (122mm) 
Height: 1.0” (25mm)
Power Consumption3.4 watts
Environment0 – 50 C; 5% - 95% humidity non-condensing; 0 – 10,000 feet altitude
PowerExternal AC/DC required; 12VDC 1.25A
Shipping Weight2 lbs. (.90 kg)
Safety ComplianceWall Mount Power Supply: UL Listed and CSA certified
Regulatory ComplianceEN55022 Class A, EN55024; CE Mark
WarrantyLifetime
Browse Similar Items
Media Converter Products > Stand-Alone Media Converters


              Ask your Sales Rep for Details