SPOEB1011-100 Power Over Ethernet PSE Media Converter

Media Converter Products

Switches

Power Over Ethernet

SFP's and GBICS

NIC PCMCIA PCIe Adapters

	GN-I BNC Gooseneck Light
	$29.95

	more details

RL-I Front Rack Lights

$79.20

RL-LED Front Rack Lights

$118.80

CAPTF3314-105 POTS 2-wire Copper to Fiber NID Media Converter Card

$688.28

more details

2	CAPTF3314-115 POTS 2-wire Copper to Fiber NID Media Converter Card
	$688.28

	more details

3	CPSMC0800-100 8-slot Point System™ Chassis
	$317.92

	more details

Home > Media Converter Products > Stand-Alone Media Converters > 10/100 Mbps Converters

SPOEB1011-100 Power Over Ethernet PSE Media Converter

Part Number SPOEB1011-100

SPOEB1011-100 Power Over Ethernet PSE Media Converter

SPOEB1011-100 Shown

Email a friend

Price

Retail Price: $375.00
Your Savings: $140.00
Your Price: ~~$251.56~~ On sale: $235.00

Availability:	In Stock

Choose Options

Mounting Options

Quantity

Description

Transition Networks 10/100BASE-TX (RJ45) [100 m/328 ft] to 100BASE-FX (ST) multimode 1300nm [2 km/1.2 miles] Power over Ethernet Stand Alone Media Converter

Enables enterprises to provide power to network devices over the existing CAT5 data connection.

Transition's AC powered PoE media converters combine data received over a fiber optic link with -48VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE802.3af™: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input.

This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities (see switch section under Specifications).

In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize.

The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs of the MDI.

Features :

External AC power supply
IEEE 802.3af Power Over Ethernet compatible
48 VDC PSE output voltage
Signal Pair Power Insertion
PD Detection Signature
Over-Current Protection & Under-Current Detection
Powered Device Reset
Minimum Load Sensing
Fault Protection Input
Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.

Specifications :

Standards	IEEE Std. 802.3™, IEEE Std. 802.3af
Fiber Optic Connector Specs
Multimode	Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.00 dB
Switches	SW1: Auto-Negotiation On/Off SW2: Speed TP: Force 10Mbps or 100Mbps (SW1 off) SW3: Duplex TP: Force Half or Full Duplex (SW1 off) SW4: Duplex Fiber: Half or Full Duplex SW5: AutoCross™ On/Off SW6: PSE On/Off SW7: PSE/LPT On/Off SW8: Not Used
Dimensions	Width: 3.25" [82 mm] Depth: 4.8" [120 mm] Height: 1.0" [25 mm]
Power	90 – 250VAC external power supply
Power Consumption	20 watts max.
Operating Temperature	0 – 40°C [32° – 104°F]
Storage Temperature	-25° to +85°C [-13° to +185°F]
Environment	5% – 95% humidity non-condensing, 0 – 10,000 ft. altitude
Shipping Weight	2 lbs. [0.90 kg]
Compliance	EN55022: 1994+A1:1996+A2:1997 Class A, FCC Part 15 Subpart B; UL 1950
Warranty	Lifetime

Browse Similar Items
Media Converter Products > Stand-Alone Media Converters > Power Over Ethernet Converters Media Converter Products > Stand-Alone Media Converters Power Over Ethernet