| Standards | IEEE Std. 802.3ab and IEEE Std. 802.3z |
| Fiber Optic Connector Specs |
| Multimode | Min TX PWR: -10.0 dBm
Max TX PWR: -4.0 dBm
RX Sensitivity: -17.0 dBm
Max In PWR: 0.0 dBm
Link Budget: 7.00 dB |
| 6-position Switch | SW1: Remote Fiber Fault Detect (Down=Enabled)
SW2: Symmetric Pause
SW3: Asymmetric Pause
SW4: Transparent Link Pass Through (UP=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback (Down=Enabled) |
| Status LEDs | PWR (Power): Steady green LED indicates connection to external AC power
RXF (Fiber receive): Flashing LED indicates reception of data on fiber link
LKF (Fiber link): Steady LED indicates fiber link connection
RXC (Copper receive): Flashing LED indicates reception of data on copper link
LKC (Copper link): Steady LED indicates copper link connection |
| Dimensions | Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm] |
| Power | External AC/DC required; 12V DC, 1.5A; unregulated; standard |
| Environment | 0 – 50° C operating; 5% – 95% humidity non-condensing; 0 – 10,000 feet altitude |
| Safety Compliance | Wall Mount Power Supply: UL Listed, C-UL Listed (Canada) |
| Regulatory Compliance | FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark |
