| Transition Networks (ST) multimode 1300nm [2 km/1.2 miles] to 4 port T1/E1 (RJ48) [1.5 km/.9 miles], 1 port 6-pin DIN [3 meter/ 10 feet], 1 port 10/100BASE-TX (RJ45) [100 m/328 ft] Extended Temperature Transport MUX Stand Alone Media Converter
These products offer a low cost transport capability for four T1/E1/J1, one Ethernet and one data channel line (x4TEF10XX-11X). The offering will provide copper connections compatible with G.703, AMI/B8ZS/HDB3, 10/100BASE-TX, as well as RS232 channel; while the optical connection will run at 155 Mbps. TDM traffic is not mapped to Ethernet. A hardware-based solution guarantees the constant bit rate of TDM transport without requiring traffic management. The product provides physical layer status monitoring, alarm classification and data classification functions for Telecom providers to manage their fiber optic network and reduce operation and maintenance costs. Target applications of the device include: FTTx, such as Fiber-to-the-Business, Fiber-to-the-Building, Fiber to-the-MDU and Fiber-to-the-Home.
Features :
| - Low cost transport capability: (4) T1/E1/J1; (1) Ethernet and (1) RS232 data channel line
- Target applications include: FTTx, such as Fiber-to-the-Business, Fiber-to-the-Building, Fiber-to-the-MDU and Fiber-to-the-Home.
- Auto-Negotiation for 10/100BASE-TX
Allows devices to perform automatic configuration to achieve the best possible mode of operations over a link. - AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration. - Transparent Link Pass Through
Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters. - Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions. - Remote Management
Select stand-alone converters can be managed through SNMP when used in conjunction with a chassis based converter. - Local and Remote Loopback
This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes. - Remote Fiber Loss Signaling
- AIS/TAOS
- LEDs for each data port
- DIP switches for line code, line length,local loopback or remote loopback
- T1/E1/J1 mode settings
- Dry Relay Contacts on each TDM port
- Local (AUX) Management Interface (RS232 connector)
- Switch selection for Data or Management mode on RS232 interface
- Access to complete status information on local and remote device
- Access to local and remote configuration
- Switch or SNMP selected Baud rate operation
- Field Upgradeable Firmware
|
|
Specifications :
| Standards | IEEE Std. 802.3 2003; Telecordia TR-NWT-001089: FCC Part 68, UL1459; ITU-T, ANSI, AT&T, ETSI; TBR 12; PD 7024: 1994 (NTR 4); AMI/B8ZS/HDB3; G.703 | | Switches | Numerous switch settings for line coding, line buildout, loopback (per port), AIS setting, data/mgmt RS-232 and RS-232 port speed and parity | | Ethernet port settings | Auto-Negotiation, Force speed/duplex and enable
Transparent Link Pass Through | | Dimensions | Width: 3.7" [94 mm]
Depth: 4.7" [119 mm]
Height: 1.8" [46 mm] | | Power External | AC/DC provided; 12 VDC, 1.25A;
unregulated; standard; UL listed | | Power Consumption | 6.0 Watts | | Operating Temperature | -20°C – 65°C | | Storage Temperature | -40°C – 85°C | | Altitude | 0 – 10,000 ft. | | Operating Humidity | 5% – 95% (non-condensing) | | Shipping Weight | 2 lbs. [0.90 kg] | | Safety Compliance | Wall Mount Power Supply:
UL listed, and CSA certified | | Regulatory Compliance | FCC Class A, VCCI Class A, CISPR/EN55022 Class A, ICES-003, CE Mark | | Warranty | Lifetime |
|
