| Milan Technologies 8-port POE 10/100BASE-TX (RJ45) [100 m/328 ft], 2x SFP/RJ45 combo Gigabit ports, Layer 2 remotely managed switch, with built in power supply
The MIL-SM8TXAF2GPA connects remote POE segment to the network over fiber. The switch delivers a full 15.4Watts of DC power on each of eight POE switch ports. POE ports provide data connection and the power source (PSE) for such POE PD devices as Wireless Access Points, VoIP phones and Network Cameras. The series includes a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other POE features include Over-Current Protection and Under-Current Detection. The series is fully compatible with devices that comply with the IEEE802.3af standard and it is capable of inserting power on the unused pairs of the MDI. Management features include port based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP Snooping or querying, port mirroring, port security. Security includes static addressing, filtering and blocking of packets to identified MAC addresses. Four priority queues insure minimum delay for voice over IP or multimedia network data. Non-blocking 5.6Gbps architecture assures rapid packet delivery while 8,000 MAC address table provides swift lookup and packet forwarding.
Features :
- IGMP v1 & v2
- 8-port 10/100 Base-TX plus
100Base-FX/1000 Base-X SFP - 8 ports with integrated
POE injectors - Never Down Ring Techhology
- IEEE Std. 802.3af Compliance
- Full 15.4 Watts per port
- POE Legacy and Reverse Polarity
Support - Non-blocking switching architecture
- IEEE802.1p Class of service
- Ipv4 IP TOS and DiffServ QOS classification, IPv6 Traffic
class with 4 queues per port - IEEE 802.1q VLAN, up tp 256 groups,
VLAN tagging ID up to 4096. - Static MAC, 100 entries
- IEEE 802.1x
- RADIUS client
- DHCP Client and Server, SNTP
- Auto MDI-MDIX
- IGMP/GVRP
- Port Mirroring: Supports RX, TX and Both packet mirror
- 8K Mac Address
- Telnet/ Web-Based management
- TFTP Firmware Upgrade and configuration backup
|
|
Specifications :
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex;
IEEE Std. 802.3u 100BASE-TX, 10/100Mbps,
Half/Full Duplex;
IEEE Std. 802.3x Flow control and Back-pressure;
IEEE Std. 802.3ad Link Aggregation;
IEEE Std. 802.1Q VLAN Tagging;
IEEE Std. 802.3ab 1000BASE-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3af Power over Ethernet
IEEE Std. 802.1p Class of service;
IEEE Std. 802.1d Spanning Tree Protocol;
IEEE Std. 802.1w Rapid Spanning Tree Protocol;
IEEE Std. 802.1X Authentication Protocol | | Protocols | CSMA/CD | | Technology | Store and Forward switching architecture | | Transfer Rate | 14,880 pps for 10Mbps
148,800 pps for 100Mbps
1,488,000 pps for Gigabit Fiber Ethernet Port | | Connectors | 10/100 copper: 8x RJ-45 with Auto-MDIX Fiber:Two dual speed SFP ports 100BASE-FX/1000 BASE-X | | MAC Addresses | 8K MAC address table | | Network Cable | 10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA-
568 100-ohm (100 m)
100BASE-TX: 2-pair UTP/STP Cat. 5 cable; EIA/TIA-
568 100-ohm (100 m) | | Backplane | 5.6Gbps | | LEDs | RJ-45 port: 10/100; Link/Activity; Full duplex/Collision
Fiber: Link/Activity
Power: On/Off
POE: PWR FWD | | Power Supply | Built-in AC power supply: AC 100~240V, 50/60Hz,
200W;
Optional External AC/DC Power Supply 48VDC Input | | Power Consumption | (DC) 20 watts (Non-POE functions) | | Operating Temperature | 0° to 45°C (32° to 113°) | | Operating Humidity | 10% to 90% (non-condensing) | | Dimensions | Width: 11" [280 mm]
Depth: 8.3" [211 mm]
Height: 1.7" [44 mm] | | EMI Compliance | FCC Class A, CE Mark | | Safety Compliance | UL, cUL |
|
