MIL-SM802GAF 8-Port 10/100BASE-TX POE Switch

Milan Technology 8-port 10/100Mbps layer 2 remotely managed switch with 4-Ports full POE and one SFP/RJ45 Combo port

The MIL-SM802GAF connects remote POE segment to the network over fiber. The switch delivers a full 15.4Watts of DC power on each of four POE switch ports. POE ports provide data connection and the power source (PSE) for such POE PD devices as Wireless Access Points, VoIP phones and Network Cameras. The series includes a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other POE features include Over-Current Protection and Under-Current Detection. The series is fully compatible with devices that comply with the IEEE802.3af standard and it is capable of inserting power on the unused pairs of the MDI.

Management features include port based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP Snooping or querying, port mirroring, port security. Security includes static addressing, filtering and blocking of packets to identified MAC addresses. Four priority queues insure minimum delay for voice over IP or multimedia network data.

Non-blocking 5.6Gbps architecture assures rapid packet delivery while 8,000 MAC address table provides swift lookup and packet forwarding.

Features :

IGMP v1 & v2
8-port 10/100 Base-TX plus

100/1000Base-X or 10/100/1000Base-T
4 ports with full PSE POE delivery
Reverse polarity POE cable
IEEE Std. 802.3af Compliant
Full 15.4 Watts per port
POE Legacy and Reverse Polarity

Support
Remote Device power shutdown
IEEE802.1p Class of service
Ipv4 IP TOS and DiffServ QOS classification,

IPv6 Traffic class with 4 queues per port
IEEE 802.1q™ VLAN, up to 256 groups,

VLAN tagging ID up to 4096
Static MAC, 50 entries
IEEE 802.1x
RADIUS client
DHCP Client and Server, SNTP
Auto MDI-MDIX
IGMP/GVRP
Port Mirroring: Supports RX, TX and Both packet mirror
8K MAC Address
Telnet/CLI/Web-based management
TFTP Firmware Upgrade

Specifications :

Standards	IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex; IEEE Std. 802.3u 100BASE-TX, 10/100Mbps, Half/Full Duplex; IEEE Std. 802.3x Flow control and Back-pressure; IEEE Std. 802.3ad Link Aggregation; IEEE Std. 802.1Q VLAN Tagging; IEEE Std. 802.1p Class of service; IEEE Std. 802.1d Spanning Tree Protocol; IEEE Std. 802.1X Authentication Protocol IEEE Std. 802.3ab 1000BASE-T IEEE Std. 802.3z Gigabit Fiber IEEE Std. 802.3af Power Over Ethernet IEEE 802.1w Rapid Spanning Tree Protocol
Protocols	CSMA/CD
Technology	Store and Forward switching architecture
Transfer Rate	14,880 pps for 10Mbps 148,800 pps for 100Mbps
Connectors	Copper: 8x RJ-45 incl. 4x(POE) Ports, 1x10/100/1000B-T Fiber: SFPport 100/1000Base-X
MAC Addresses	8K MAC address table
Memory Buffer	384Kbytes (3Mbits)
Network Cable	10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA- 568 100-ohm (100 m) 100BASE-TX: 2-pair UTP/STP Cat. 5 cable; EIA/TIA- 568 100-ohm (100 m)
Backplane	5.6Gbps
LEDs	RJ-45 port: 10/100; Link/Activity; Full duplex/Collision Fiber: Link/Activity Power: On/Off
Power Supply	Built-in AC power supply: AC 100~240V, 50/60Hz, 110W
Power Consumption	(DC) 20 watts (Non-POE functions)
Operating Temperature	0° to 45°C (32° to 113°)
Operating Humidity	10% to 90% (non-condensing)
Dimensions	Width: 8.5" [217 mm] Depth: 5.5" [140 mm] Height: 1.7" [44 mm]
EMI Compliance	FCC Class A, CE Mark
Safety Compliance	UL, cUL