The SPATZ HDMI-4XO distributes and amplifies one DVI/HDMI output of a DVD-player, PC or satellite receiver up to 4 displays. The units supports bandwiths up to 2,25 Gbit/s ,all deep color modes and all HD audio formats in Bitstream.

It has 2 modes how to handle the EDID forwarding. When the LED is lid up the unit uses the EDID which has been learned previously from a display that has been connected to OUTPUT 1. If you want to learn EDID data from a display then connect at OUTPUT 1, touch the button so the LED is off and then hold it for min. 3 s. When the LED has lid up you have succesfully stored the EDID data to the internal memory. An alternative method is to use the preprogrammed EDID that is permanentely stored in the unit holding almost all PC and HDTV resolutions available. 

The internal EDID simulates a monitor with RGB colorspace because that is compatible with HDMI and DVI monitors.+ To activate press the button so LED is off. This may solve problems with incorrect EDID forwarding resulting in no picture with some sources. Up to 3 units may be cascaded to form larger distribution systems at UXGA resolutions. If you want to use the unit with DVI equipment you can get appropriate adaptors or cables from us or any other suitable source.

NO AUDIO ?

In case the distribution amp is not passing audio it might be that the unit loaded EDID information from a display that is not supporting HDMI Audio. In this case you have to connect a HDMI Audio capable display (typical with integrated speakers) at Output 1 or use the unit in the “internal EDID” mode that activates all audio supported by HDMI 1.3.

Technical Data

Power supply voltage : DC 5V min. 500mA

Video input : DVI or HDMI (HDCP)

Video output : DVI or HDMI (HDCP)

supported resolutions : 480i –1080p VGA-UXGA

supported framerates  : 24-120 Hz

Dimension : 102 x 100 x 30 mm