The HDMI-2X distributes and amplifies one DVI/HDMI output of a DVD-player, PC or satellite receiver up to 2 displays. The Input support HDCP so must the displays that are connected at the outputs

It is important to connect the first display to Output 1 due to EDID information. The sync LED indicates a valid input signal. Up to 3 units may be cascaded to from larger distribution systems at 1080p resolutions. If you use 720p or 1080i resolutions the number of possible cascades are higher.

The HDMI-2X is also an amplifier and can be used to increase ouble your usuable calbe length up to 15m. Longer cables run might be possible but are highly affected by cable quality, output resolution and refresh rate.

If you want to use the unit with DVI equipment you can get appropriate adaptors or cables from us or any other suitable source.

NO AUDIO ?

In case the HDMI-8X is not passing audio it might be that the unit loaded EDID information from a display that is not supporting HDMI Audio. In this case you have to connect the source at the input and a HDMI Audio capable display at Output 1.

Repower the HDMI-8X several times until you get the audio back working.

Technical Data:

Power supply voltage : DC 5V

Video input : DVI or HDMI (HDCP)

Video output : DVI or HDMI (HDCP)

supported resolutions : 480i –1080p

supported framerates  : 24-120 Hz

Dimension : 102 x 90 x 30 mm