Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the distance between two 10BASE-T devices up to 5 km (3.1 mi.) using multimode fiber or up to 40 km (24.9 mi.) using single mode fiber without a repeater.

Connect Unlike Devices
Connect your workgroup to a distant server or a central switch; or extend distances between like and unlike devices in either full or half-duplex modes.

Features : 

AutoCross™ Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration. Link Pass Through Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal. Automatic Link Restoration Transition Networks's converters will automatically re-establish link in all network conditions.

Specifications :

Standards	IEEE Std. 802.3™ 10BASE-T, 10BASE-FL
Switch	S1:  Enables/disables Link Pass Through
Status LEDs	PWR (Power):  ON = connection to external AC power  Link:  ON = unit is receiving link pulses from a compliant device  RX (Receive):  ON = packets are being received
Dimensions	Width: 3.0" [76 mm]  Depth: 3.9" [99 mm]  Height: 1.0" [25 mm]
Power	External AC/DC required; 12VDC, 0.5A, unregulated, standard
Environment	0 – 50°C; 5% – 95% humidity non-condensing; 0 – 10,000 ft. altitude
Shipping Weight	2 lbs. [0.90 kg]
Safety Compliance	Wall Mount Power Supply:  UL Listed, C-UL Listed (Canada)
Regulatory Compliance	FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
Warranty	Lifetime