| Standards | IEEE 802.3® 100BASE-FX, 100BASE-TX |
| Connectors | 1 RJ-45 (100BASE-TX: 100 meters); 1 duplex fiber optic |
| Fiber Optic Connector Specs |
| Multimode | Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.00 dB |
| Jumpers | Jumper Block 1: Auto Cross enable |
| Switches | SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: LPT On/Off
SW4: FEF On/Off |
| Status LEDs | Power: Lit for normal operation
SDF: (Signal Detect Fiber) Lit for fiber link
SDC (Signal Detect Copper): Lit for copper link
RXF (Receive Fiber): Flashing = Rx data
RXC (Receive Copper): Flashing = Rx data |
| Power | External AC/DC required 9V DC, 1.0A; unregulated; standard |
| Dimensions | Width: 3.0" (76 mm)
Depth: 4.7" (119 mm)
Height: 1.0" (25 mm)< |
| Environment | -25° C to +65° C; 5% - 95% humidity non-condensing; 0 - 10,000 feet altitude |
| Safety Compliance | Wall Mount Power Supply:
UL listed and CSA certified |
| Regulatory Compliance | FCC Class A, CISPR/EN55022 Class A, EN55024, EN61000, CE Mark |
