Home†† About Us†† My Account†† Contact Us††
Media Converter Products
Switches
Power Over Ethernet
SFP's and GBICS
NIC PCMCIA PCIe Adapters
CWDM Products
Home Audio Systems
Power Equipment
Fiber Cables
Copper Cables
$0 - $499.99
$500.00 - $1499.99
Over $1500.00
C6010-1029-A2 T1/E1 to Fiber Ion Platform Media Converter Card C6010-1029-A2 T1/E1 to Fiber Ion Platform Media Converter Card
$1,035.69
more details
C6010-1029-A1 T1/E1 to Fiber Ion Platform Media Converter Card
$970.14
C6010-1011 T1/E1 to Fiber Ion Platform Media Converter Card
$468.68
Home > Media Converter Products > Media Converter Cards
CSDTF1011-120 Remotely Managed T1/E1 NID Converter Card
Part Number CSDTF1011-120
CSDTF1011-120 Remotely Managed T1/E1 NID Converter Card
CSDTF1011-120 Shown
Email a friend   
Price
Retail Price:  $750.00
Your Savings:  $232.50
Your Price:  
$517.50
Availability:
In Stock
Share |
Quantity
 Description
Transition Networks T1/E1 twisted pair (RJ48) [1.5 km/.9 miles] to (ST) multimode 850nm [2 km/1.2 miles] remotely managed Points System media converter card


  • Remote unit "in-band" management
  • Local or Remote Loop-backs on copper or fiber in software mode
  • Loopback switch facilitates local installation
  • Converts the copper ports on T1/E1 devices, such as a PBX or T1/E1 Router, to multimode or single mode fiber
  • Extends distances 2,000 meters over multimode fiber or 80,000 meters over single mode fiber.
  • Switch selectable RJ-48 connectors for T1 or E1
  • Jitter attenuators optimize Bit Error Rate (BER) performance
  • Network debug procedures make BER testing more convenient
  • Built-in troubleshooting with the addition of a selectable TAOS (Transmit All Ones) switch on the fiber and copper interfaces allows the network engineer to test all T1/E1 equipment on that network segment and ensure the network link.
  • Dry relay contacts enable the media converter to be tied into a separate alarm circuit commonly found in a T1/E1 twisted pair environment. Contacts will be activated on loss of power or loss of fiber link.
  • An LED provides Alarm Indication Signal (AIS)
  • Can be used with fractional T1/E1 circuits.
  • Point Systemô Management Features:
    • Report local or remote converter status:
      • Copper & Fiber Link status
      • Hardware switch settings: LBO, AIS Copper, AIS Fiber, HW/SW
      • AIS detected Copper & Fiber
      • Model Number
      • Copper & Fiber Connector
    • Local or remote comand operations include:
      • Loop-back Copper & Fiber
      • AIS transmitted on Fiber on loss of Copper link
      • AIS transmitted on Copper on loss of Fiber link
      • Boot-load firmware

StandardsITU-T, ANSI, AT&T, ETSI
ConnectorsE1: (2) 75 ohm coax; (1) duplex or simplex fiber optic 

T1/E1: (1) UTP 100/120 ohm RJ-45; (1) duplex or simplex fiber optic
Fiber Optic Connector Specs
MultimodeMin TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -32.5 dBm
Max In PWR: -14.0 dBm
Link Budget: 13.50 dB
SwitchesSW1: 1,2,3: Line Build out for short haul/DB in Long Haul (See Table) 

Short Haul Mode: 
Pos 4 not used 

SW2 - 1:Transmit all ones into copper on loss of fiber link (Up=Disabled)

SW2 - 2:Transmit all ones (AIS) into fiber on loss of copper link (Up=Disabled)

SW2 - 3: Long Haul/Short Haul (Up=Short Haul)

SW2 - 4: T1/E1 selection (Up=T1)
3-position JumperHardware: Converter mode is determined by 4-position switch settings 

Software: Converter mode is determined by most recently saved on-board microprocessor settings.
Status LEDsPWR (Power): Steady green LED indicates connection to external AC power

SDC (Signal Detect/Copper): On indicates twisted pair link is up

SDF (Signal Detect/Fiber): On indicates fiber link is up
DimensionsWidth: 0.86" (22 mm)
Depth: 5.0" (127 mm)
Height: 3.4" (86 mm)
Power Consumption6.0 watts
EnvironmentSee chassis specifications
Shipping Weight1 lb. (0.45 kg)
ComplianceUL Listed, C-UL Listed (Canada); CISPR/EN55022 Class A; FCC Class A; CE Mark
WarrantyLifetime
Switch Settings
Long Haul (SW1-3 unused)
SW1-1SW1-2 
DownDown0 db output pulse
UpDown-7.5 db output pulse
DownUp-15 db output pulse
UpUp-22.5 db output pulse
Short Haul (SW1-4 unused)
SW1-1SW1-2SW1-3 
UpUpDownDSX-1, 0-133 ft.
DownDownUpDSX-1, 133-266 ft.
UpDownUpDSX-1, 266-399 ft.
DownUpUpDSX-1, 399-533 ft.
UpUpUpDSX-1, 533-655 ft.
UpUpDownANSI, T1.403
DownUpDownDSX-1, 6.0 V
Browse Similar Items
Media Converter Products > Media Converter Cards > T1/E1 Cards


              Ask your Sales Rep for Details