| Standards | IEEE Std. 802.3ab and IEEE Std. 802.3z |
| Fiber Optic Connector Specs |
| Multimode | Min TX PWR: -10.0 dBm
Max TX PWR: -4.0 dBm
RX Sensitivity: -17.0 dBm
Max In PWR: 0.0 dBm
Link Budget: 7.00 dB |
| 6-position Switch | SW1: Remote Fiber Fault Detect (Down=Enabled)
SW2: Symmetric Pause
SW3: Asymmetric Pause
SW4: Transparent Link Pass Through (UP=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback (Down=Enabled) |
| 3-position Jumper | Hardware: Converter mode is determined by 6-position switch settings
Software: Converter mode is determined by most recently saved on-board microprocessor settings. |
| Status LEDs | PWR (Power): ON=connection to external AC power
LKF (Fiber Link): ON=fiber connection
RXC (Copper Receive): Flashing=Receiving data on copper link; ON=Copper Link connection
Duplex: ON=Copper Link connection |
| Dimensions | Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm] |
| Environment | See chassis specifications |
| Regulatory Compliance | CISPR/EN55022 Class A + EN55024; FCC Class A; CE Mark |
