| Standards | IEEE Std. 802.3™ 10BASE-T; 10BASE-FL |
| Fiber Optic Connector Specs |
| Multimode | Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -32.5 dBm
Max In PWR: -14.0 dBm
Link Budget: 13.50 dB |
| 4-Position Switch | Fiber Port (Up = enabled): Enables/disables network traffic on the fiber port
Copper Port (Up = enabled): Enables/disables network traffic on the copper port
AutoCross™ (Up = enabled): Enables/disables the AutoCross™ function
Link Pass Through (Up = enabled): Enables/disables the Link Pass Through function |
| 3-Position Jumper | Hardware: Converter mode is determined by 4-position switch settings.
Software: Converter mode is determined by most recently saved on-board microprocessor settings. |
| Status LEDs | PWR (Power): On for normal operation
LKF (Link Fiber): Steady LED indicates good 10BASE-FL link and normal operation
RXF (Receive Fiber): Flashing LED indicates data reception on 10BASE-FL link
LKC (Link Copper): Steady LED indicates good 10BASE-T link and normal operation
RXC (Receive Copper): Flashing LED indicates data reception on 10BASE-T link |
| Dimensions | Width: 0.85" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm] |
| Environment | See chassis specifications |
| Regulatory Compliance | EN55022; EN55024; EN61000; CE Mark
FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A) and Europe (CISPR Class A.)
FCC & CISPR Class B devices comply with radiated emissions standards for residential applications in the United States (FCC Class B) and Europe (CISPR Class B.) |
